Beginner guide

Espresso parts explained

Tap a number to learn what each part does, how to clean it, and how often to replace it. Drag to turn the model.

Generic shapes, not a real brand. Inside parts (boiler, pump, burrs) show in X-ray mode.

All parts — what they do and when to replace

  1. 1Water tank (machine)

    Holds fresh water for the machine.

    Clean: Rinse weekly. Use fresh water every day.
    Replace: Only if cracked.

  2. 2Water filter (machine)

    Sits in the tank. Stops scale and improves taste.

    Clean: —
    Replace: Every 2–3 months.

  3. 3Pump (machine)

    Pushes water through the coffee at about 9 bar.

    Clean: No home cleaning needed.
    Replace: Check at the 12–24 month service.

  4. 4Boiler / heater (machine)

    Heats water for coffee and steam. Some machines use a thermoblock instead.

    Clean: Descale if your manual says so.
    Replace: Service every 12–24 months.

  5. 5Group head (machine)

    Where the portafilter locks in and hot water comes out.

    Clean: Flush daily. Backflush weekly.
    Replace: Service every 12–24 months.

  6. 6Group gasket (machine)

    Rubber ring that seals the portafilter. If it leaks, change this.

    Clean: Brush weekly.
    Replace: Every 6–12 months.

  7. 7Shower screen (machine)

    Metal mesh that spreads water evenly over the coffee.

    Clean: Brush weekly. Soak monthly.
    Replace: Every 1–2 years, or if bent.

  8. 8Portafilter (machine)

    Handle that holds the basket of coffee.

    Clean: Rinse daily. Soak weekly.
    Replace: Rarely. Upgrade to bottomless to see channeling.

  9. 9Filter basket (machine)

    Metal cup with tiny holes that holds the coffee. Pressurized = easy; non-pressurized = real espresso.

    Clean: Rinse daily.
    Replace: Every few years, or if dented.

  10. 10Steam wand (machine)

    Makes hot milk foam for lattes and cappuccinos.

    Clean: Purge and wipe after every use.
    Replace: Tip: soak monthly. Seal: at service.

  11. 11Steam knob (machine)

    Turns the steam on and off.

    Clean: Wipe weekly.
    Replace: At service if it drips.

  12. 12Pressure gauge (machine)

    Shows brew pressure. About 9 bar is normal.

    Clean: Wipe only.
    Replace: Rarely.

  13. 13Drip tray (machine)

    Catches water and drips under the cup.

    Clean: Empty daily. Wash weekly.
    Replace: Only if broken.

  14. 14Cup warmer (machine)

    Top tray that keeps cups warm.

    Clean: Wipe weekly.
    Replace: Never.

  15. 15Power / brew buttons (machine)

    Turn on, choose single or double shot.

    Clean: Wipe only.
    Replace: Never.

  16. 16Bean hopper (grinder)

    Holds whole beans above the burrs.

    Clean: Wipe weekly (oils go stale).
    Replace: Never.

  17. 17Burrs (grinder)

    Two metal rings that crush beans evenly. The heart of the grinder.

    Clean: Clean monthly with Grindz.
    Replace: Every 2–5 years (home use).

  18. 18Grind adjustment (grinder)

    Changes grind size: finer = slower shot, coarser = faster.

    Clean: —
    Replace: Never.

  19. 19Grind chute (grinder)

    Where ground coffee comes out.

    Clean: Brush weekly.
    Replace: Never.

  20. 20Dosing cup (grinder)

    Catches the grounds, then you flip them into the basket.

    Clean: Wipe daily.
    Replace: If dented.

  21. 21Tamper (tool)

    Presses coffee flat and even in the basket.

    Clean: Wipe daily.
    Replace: Never.

  22. 22WDT tool (tool)

    Thin needles that break up clumps before tamping.

    Clean: Wipe daily.
    Replace: If needles bend.

  23. 23Scale (tool)

    Weighs beans and the shot. Makes coffee repeatable.

    Clean: Wipe only.
    Replace: Battery as needed.

  24. 24Knock box (tool)

    Bin for used coffee pucks.

    Clean: Empty daily.
    Replace: Never.

Service schedule

WhenWhat to do
Every day
  • Rinse portafilter and basket
  • Purge and wipe the steam wand after each use
  • Flush the group head for 2–3 seconds
  • Empty the drip tray
Every week
  • Brush the group head and gasket
  • Backflush with water (machines with a 3-way valve)
  • Soak portafilter and basket in Cafiza
  • Brush out the grinder chute
Every month
  • Backflush with Cafiza (3-way valve machines)
  • Clean grinder burrs (Urnex Grindz or a brush)
  • Soak the steam wand tip
  • Check your water hardness
Every 1–3 months
  • Descale (follow your manual — some dual boiler makers say use soft water instead)
Every 2–3 months
  • Replace the water filter cartridge
Every 6–12 months
  • Replace the group head gasket
Every 12–24 months
  • Professional service: check valves, seals, pump pressure and scale
  • Replace the shower screen if bent or stained
Every 2–5 years
  • Replace grinder burrs (home use)
  • Replace a dented or worn basket

As an Amazon Associate I earn from qualifying purchases.

Find the filter & gasket for my machineSee a shot in 3D