Why is my portafilter leaking?
Water or coffee coming out around the top of the portafilter means the seal is not tight. Here is how to find the cause.
5 common causes
- Old group gasket. The rubber ring gets hard and flat with heat. If the handle now turns further right than before, the gasket is worn. Replace it every 6–12 months.
- Coffee on the rim. Grounds on the basket edge stop a good seal. Wipe the rim before you lock in. A dosing funnel helps.
- Too much coffee. If coffee touches the shower screen, the portafilter cannot lock fully. Use the dose your basket is made for.
- Dirty group head. Old coffee oil builds up. Brush the gasket weekly and backflush (if your machine can).
- Wrong basket or loose portafilter. A basket from another brand may sit too high or too low. Lock the handle firmly.
How to change a group gasket
- Turn the machine off and let it cool.
- Remove the shower screen (usually one screw).
- Pull the old gasket out with a small flat screwdriver or a pick. Be gentle with the metal.
- Clean the groove well.
- Push the new gasket in, flat side down (check your gasket's direction).
- Put the shower screen back. Lock the portafilter in firmly a few times to seat the gasket.
Tip: silicone gaskets last longer than rubber. E61 gaskets come in 8, 8.5 and 9mm thickness — 8.5mm is standard.
Which gasket fits my machine?
As an Amazon Associate I earn from qualifying purchases.
Please check your model number before buying. Not sure? Use the care finder.